MC Precision Super Hi-Pressure Rapid Vise

• Quickclamping level lift

  The vise principle is the use ofself-developed reciprocating air compressor motor (patent structure) in orderto promote continuous pressure oil passage way, to achieve automation.

• High clamping force

  Low-pressure compressed air source8kg / cm2, the clamping force can be up to ultra-high 9000 kgf.

• Automatically find the highest pneumatic source

  When copper and aluminum productsprocessing or cast iron light perform heavy cutting. Set at the desiredpressure with the regulator, will not result in low air pressure source andloss of pressure, but the pressure and the regulator with automatic fill function,to ensure that the clamp the workpiece.

• Humanized design

  Just a manual switch control viseswitch, the switching speed of just 1.5 seconds, holding a safe distance for8mm, issue injury prevents operation when the clip can also be done with a specialautomated unmanned production system design (can be used with electricallycontrolled valve or via the controller machine's operation).

• Stand, side, lying with three for use

  Vise fixed-inch size, bulk six-sidedpolished plate and set aside slots, no fixture plate, you can erect processing.

• Ultra Material

  Vise body material with high ductility of spheroidal graphite castiron (FCD600) one piece design, vise both sides of the slide hardened heat(HRC45 °), ensure high precision and high wear resistance, high tensilestrength.

• Anglelock fixed pressed down structure

  Angle lock semi-sphere can be generated under the power of the lock,remove the floating jaw plate and workpiece tilt.