– Capacity: 10KVA to 10,000KVA

   • 1 Phase Voltage:

      100V, 120V, 200V, 220V, 230V, 240V, 3.3KV, 11KV, 22KV, other voltage are available on order.

   • 3 Phase Voltage:

      220V, 380V, 400V, 440V, 460V, 575V, 3.3KV, 11KV, 22KV, other voltage are available on order.

– Based on CNS-598, CNS-599 or the National Standards of each country.

– Nippon Steel Standard 50H 400 (H14)

– Heat-resistant Enameled Cooper Wire

– Energy Saving

   • The iron core is made of high permeability original silicon steel sheets to greatly reduce
 iron loss (No-load loss). Copper loss (Load loss).

   • Improvements have been made on coil structure to reduce Copper loss (Load loss) sharply.

   • By reducing copper and iron losses, the purpose of "Energy Saving" can be realized.

– Space Saving

   • The losses incurred during operation have been lessened, the size of radiator

      in the transformer can be relatively cut down.

   • Consequently the space required for installation of this special transformer can be reduced.

– Electricity Cost Saving

   • Due to sharp decrease in full losses (by as much as 40% ~ 55%), a huge cut down effect on

      annual electricity cost can be observed.

   • Short investment return period can be expected (2 ~ 5 years approximately)

– Powder Coated Cubicle

– Connection Symbol : Dyn1 or Dyn11 (Other Connection are available to meet requirements)

– Insulation Resistance : 100 Mohm

– Layer Short Test : 400 Hz / 20 Seconds / 800V

– Withstand Voltage Insulation : AC 2000V

– Customization Welcome!