Features
1.EBG type valve is stable and has low noise.
2.Agrees with traditional and microcomputer type of electric control, and brings out the best working condition of unifying hydraulic and electronic.
3.Sophisticated, easy to adjust. The momentary number of pressure change is extremely small.
Specification
|
Model |
Max. Flow (L/min) |
Max. Operating Pressure (MPa) |
Max. Allowable Back Pressure (Mpa) |
Rated Flow (mA) |
Coil Resistance
|
Magnetic Hysteresis |
Repeatability |
Weight (Kg) |
|
EBG-03 |
100 |
21 |
Note |
C：750 H：700 |
10Ω |
< 3% |
< 0.5% |
7.1 |
|
EBG-06 |
200 |
8.3 |
||||||
|
EBG-10 |
400 |
10.7 |
Note: The resistance of the oil withdraw pipe should be cut down by using only one pipe and directly insert into the oil tank.
Instructions
1.Installation: Users are advised to face the air-bleeder up.
2.Air Elimination: In order to stabilize the pressure, air in the pipe and valve should be eliminated completely. Please face the air-bleeder up, open up the screw to eliminate the air till there is no bubble (set up the pressure at 30kgf/cm2), then screw back in.
3.Manual Pressure Adjustment Screw: when the electric control breaks down and is in need of power supply, users can just manually spin the screw in.
4.Drain: Please directly insert the return lines underneath the tank to avoid the pipe from bending or resisting.
The Pressure Safety Setting: Base on actual out flow of the pump and actual operating pressure. Users are advised to add 15 kgf/ cm2 when the pump is under 100 L/min.