The MF7 is a very high-performance proximity reader. This well-designed reader has technical features with medium-range capability and a small footprint. The MF7 reader is the best choice for system integrators because of its wide range of power inputs (between 5V to 18V DC). Even at 5 Volts (DC), the MF7 features a good reading range. The MF7 reader also comes with a variety of Three-In-One interfaces, RS-232, MSR ABA TK2, and Wiegand interfaces allowing it to integrate with various applications, especially security access control.

Features 
* Reading distance: up to 50mm
* Frequency: 13.56 MHz
* Read Mifare UltraLight and MF1 Standard cards
* Three -In -Interface, with Wiegand, MSR ABA TK2, and RS232 interfaces
* Fast data transfer 
* Weather resistant
* High data integrity
* User convenience 
* Easy to install
* Available to install on the metal surface

Specifications
Electrical 
Power Requirements:5~18 Volts regulated DC at 200 mA typical.      A linear regulator is recommended.
Interface: 
Wiegand 
MSR ABA Track 2 
RS232 
Or special customized specifications.
Interface Cable - 90 cm
Reads Mifare MF1 standard cards for 1024/4096 byte and Mifare Ultralight cards of EEPROM size 512bit for ISO 14443A and Mifare DESFire.
Typical Maximum reading distance: Up to 50mm at 5~12V with Mifare card in ideal conditions.
Operating frequency:  13.56MHz standard
Read Only for Unique Serial Number / Unique Identifier ISO/IEC 14443 Type 
External control Audio / Visual Indication: Internal LED and Buzzer

Mechanical
Dimensions: 83 (L) x 47 (W)x 16(H) mm
Housing material: ABS

Environmental
Operating temperature Range: -10 to 60 Deg C.
Operating relative Humidity: 10 ~ 90%.


Mifare is a registered trademark of Philips Electronics N.V.  
Note: The Specification is subject to change without notice.

Application
Access controls
Security system
ID card for admission control
Personal Identification