SPECIFICATION 
Volume: 750ml
Packaging: 12 pcs / ctn 

  APPLICATIONS
A one-component PU foam that cures by reacting with moisture, and provides an excellent filling, sealing capability for the use in construction, refrigeration systems and pipes, automobiles and home improvement. The hardened foam creates insulation from heat and noise. The foam shape could be modified by cutting and painting.

  TYPICAL USES
1. Fill cavities and gaps in walls.
2. Seal joints between walls and ceilings.
3. Fixing and insulating of window frames and door frames.
4. Stabilize pipes.
5. Can use as packaging fillers.

  FEATURES
1. Excellent adhesion to most surfaces.
2. High density to provide good sustainability.
3. Paintable cured foam.
4.  Meets B2 Fire Class
5. Complies with RoHS, won’t release harmful substances. No CFCs, won’t destroy the ozone layer.

HOW TO USE
1. To ensure its adhesion, surface should be free from grease and dust.
2. Please wear rubber gloves during application to avoid contamination with foaming agent.
3. Shake the can vigorously for around 20-30 seconds to have a good mixture of the content.
4. Screw the can to PU foam dispensing gun properly. Do not over-tighten or it will break the valve.
5. It is recommended to moisten surfaces with some water spray before applying, so that the foam will achieve the optimum expansion and faster curing.
6. Turn on the round knob counterclockwise (at the rear of the gun). Before starting your work, slightly press the trigger for 3 seconds to dispense the foam onto scrap materials and check if the foam is mixed correctly.
7. For using on vertical surfaces, follow the direction from bottom to top. Since the foam will expand, apply it carefully to avoid excessive usage and waste.
8. The foam becomes non-sticky after about 20 minutes, can be cut after about 2 hours, and totally hardened within around 24 hours (it might differ from thickness, environment and condition). 
9. Protect foam from UV light by a coating or covering such as paint and plaster is recommended to avoid discoloration.
10. For continuous application, keep one can on the dispensing gun. After finished, use PU foam cleaner to clean the gun housing and gun tip to prevent blockage.
11. If the foam already hardened, it can be removed mechanically only, like scratching with blade or abrading with sandpaper.