Catex-646 A&B 

Demulsifier for metal cutting oil

Generally, waste cutting oil is a commercial waste in an oil-in-water emulsified state. Traditional high-temperature incineration treatment is one of the feasible treatment methods, but incineration of high water content waste must rely on a large amount of auxiliary fuel, which is a waste of energy, demulsifier It can effectively reduce the waste emulsion to reduce the cost.

Demulsifier is a kind of surface active material, which can be mainly used in cutting oil emulsion of metal cutting industry, and white turbid emulsification caused by oily substances in water. Our demulsifier is characterized by integrating demulsification and flocculation. The wastewater added agent can be directly demulsified and flocculated to achieve the characteristics of fast demulsification, clear water treatment and high COD removal rate.

Properties

Characteristics

1. Catex-646A&B can effectively reduce the total amount of waste discharge.

2. The separated aqueous phase portion can be processed into a general waste water treatment facility.

3. Catex-646A&B can treat demulsification treatment of emulsion and cutting fluid wastewater from mechanical processing and hardware manufacturing.

4. Catex-646A&B can treat demulsification treatment of emulsion and alkaline wastewater produced by cold rolling in steel mills.

Application

Catex-646A：2~4%

Catex-646B：1~3%

Process：Catex-646A after dosing→stirring for 3~5min→add Catex-646B for stirring up for the quick demulsification effect.

※ Note: It is recommended that customers do a small amount of testing before actual application to control the actual usage. 

Packing:

120Kgs net in PE drum, Storage time 6 months. We suggest keep goods 

in cool and dry place.

※ After opening, we are unable to guarantee the validity of storage.

Important Note: 

The information provided is for reference only. Any violations against law or patent right are prohibited.

TEST REPORT