One way to hide an unsightly basement support post—whether it's square, rectangular, or round—is to remove it, right? This could be a costly adventure! You could build a box around it, but that can be just as unattractive as the post. So what do you do? Try column cover. It is constructed of closely set wood strips held together by a flexible backing. Relief cuts point to the outside, and the finished surface is laminated with an oak veneer so it easily wraps a post— and gives it a little class, especially if column cover has been stained. If painted, it would blend in beautifully with the rest of the environment. In a sense you are "beautifying" the post. Or use it as a wall covering.

The panel is available in 8-foot lengths to fit most standard basement support poles or lally columns. It is very easily to install with normal glue by DIY. It is the best material with nature wood finishing on basement support pole,lally columns and shaped decoration.

Advantage as follows,

1/ Glues is easily to pole for beautiful finishing touch.

2/ Height & width might be trimmed to fit.

3/ Can be stained or painted to match decoration.

4/ 48" x 8' sheet can be used as wall covering or cut to fit customer surfaces.

5/ Installation is easy in DIY. Simply cut the length with a fine tooth saw or miter box, and the width with a utility knife.

Size: 3 mm x 4' x 8' panels with 13 mm width V-grooved

We also supply solid Oak mold to match the column in diameter 6", 7" and 8" with hole 31/2", 4" and 41/2". 

Installation is easy. Simply cut the length with a fine tooth saw or miter box, and the width with a utility knife. Then glue v-grooved panel to the pole with construction adhesive. Next, you can glue or use finishing nails to install the optional solid red oak molding Cap & Base set for a nice finishing touch. Seal, stain or paint to match decoration

This products only for the area outside of USA.