Automated Optical Inspection (AOI),Automated Optical Inspection (AOI),Measurement & Analysis Instruments

PID: 1451310

Model No: 0

Made in: Taiwan

Quantity:

1000 Piece(s)Available

Payment:

Send Inquiry

Supplier Details

TEST RESEARCH, INC.

Member Since

1990

Address

7F., No.45, Dexing W. Rd., Shilin Dist., Taipei City 11158, Taiwan

+886-2-28310567

Contact Seller

View company information >

Key Features

INTRODUCTION

TRI’s top of the line AOI solution offers ultra-high speed 5-camera PCB assembly inspection that can reliably detect even the most complex solder and assembly defects. The powerful combination of intelligent software and high performance hardware delivers a reliable and easy to use AOI solution focused on highly accurate inspection results with a minimum of false calls to help optimize your production yields.

Features

• High precision 5-camera multi-phase AOI
• Smart easy programming GUI with offline editing
• Intelligent auto conveyor for reduced load times
• Reliable inspection with high accuracy and minimum false calls

Optical System

Imaging Method	Dynamic Imaging
Top Camera	4 Mpix
Angle Camera	1.3 Mpix or 6.5 Mpix (factory setting)
Imaging Resolution	10 µm, 15 µm (factory setting)
Lighting	Multi-phase RGB+W LED
3D Technology	Single/Dual 3D laser sensors
Max. 3D Range	20 mm (with 3D Laser Sensor upgrade optional)

Inspection Performance

Imaging Speed

4 Mpix@ 10 µm 2D: 60 cm²/sec
4 Mpix@ 15 µm 2D: 120 cm²/sec

Motion Table & Control

X-Axis Control	Ballscrew + AC-servo controller
Y-Axis Control	Ballscrew + AC-servo controller
Z-Axis Control	N/A
X-Y Axis Resolution	1 µm

Board Handling

Max PCB Size	TR7500 SIII: 510 x 460 mm TR7500L SIII: 660 x 610 mm TR7500 SIII DL: 510 x 310 mm x 2 lanes, 510 x 590 mm x 1 lane
PCB Thickness	0.6-5 mm
Max PCB Weight	3 kg
Top Clearance	25 mm [48 mm optional]
Bottom Clearance	40 mm
Edge Clearance	3 mm [5 mm optional]
Conveyor	Inline Height: 880 – 920 mm * SMEMA Compatible

Inspection Functions

Component	Missing Tombstoning Billboarding Polarity Rotation Shift Wrong Marking (OCV) Defective Upside Down Extra Component Foreign Material Lifted Component
Solder	Excess Solder Insufficient Solder Bridging Through-hole Pins Lifted Lead Golden Finger Scratch/Contamination

Dimensions

WxDxH	TR7500 SIII: 1100 x 1670 x 1550 mm TR7500L SIII: 1300 x 1630 x 1655 mm TR7500 SIII DL: 1100 x 1770 x 1550 mm Note: not including signal tower, signal tower height 520 mm
Weight	TR7500 SIII: 1030 kg TR7500L SIII: 1255 kg TR7500 SIII DL: 1150 kg

This is a notification message!