Type
Line Filter
Wall-Mount All Bands Cell Phone Shielder (Jammer)
PID:
1120485
Model No:
0
Made in:
Quantity:
1000 Piece(s)Available
-
+
Payment:
Send Inquiry
Supplier Details
DARZONG CO., LTD.
Member Since
2007
Address
No.20, Ln. 19, Bade Rd., East Dist., Hsinchu City 300, Taiwan (R.O.C.)
+886-3-5626641
Contact Seller
View company information >
Product Specifications
Key Features
New All Bands Shielder (2G, 3G, 4G Wimax, LTE)
Instantly blocking the reception of any cell phone in
a desired area and consequently disconnecting it from
any base-station.
● Unique capability to instantly Blocking voice
and Data Downloading.
● Disable handset connection to base station
within 20 seconds.
● Shielding radius reaches >10 meters
● Revolutionized elegant housing design concept
with invisible antenna.
● Unbeatable Covertness.
Instantly blocking the reception of any cell phone in
a desired area and consequently disconnecting it from
any base-station.
● Unique capability to instantly Blocking voice
and Data Downloading.
● Disable handset connection to base station
within 20 seconds.
● Shielding radius reaches >10 meters
● Revolutionized elegant housing design concept
with invisible antenna.
● Unbeatable Covertness.
Applications:
＊This product can be used at government organization, court house, library, restaurant, theater, music hall,
conference room and all other locations that needs to maintain order and tranquility.
＊ ATM, examination center, trade center, prison and all other locations needs to prevent fraud ans maintain security.
＊House, office,public transportation and all other places requires audio noise control.
＊ This product is not supposed to be used in a hospital, Gas station or for any anti-riot, anti-terror,
public safety applications.
＊This product can be used at government organization, court house, library, restaurant, theater, music hall,
conference room and all other locations that needs to maintain order and tranquility.
＊ ATM, examination center, trade center, prison and all other locations needs to prevent fraud ans maintain security.
＊House, office,public transportation and all other places requires audio noise control.
＊ This product is not supposed to be used in a hospital, Gas station or for any anti-riot, anti-terror,
public safety applications.
DarZong Technology, Co. Ltd. 達宗科技有限公司 DZJM511 Wall-Mount All Bands Cell Phone Shielder (Jammer) |
Check your local government ordinance
before sales or operating this product.
before sales or operating this product.
Installation:
＊ This device should be mounted at least 180 cm above the ground
and as close as possible to building's outer side walls and near
windows where the base station signal strength is the highest.
＊ Installer can use a smart phone to determine measure signal strength.
Signal strength usually can be read in the status page.
＊ Use a 4mm concrete drill bit to drill two holes 21.5 cm apart and
about 2.5 mm deep. Plug two plastic wall anchors. Drive screw into
the wall. Leave about 2 mm space between screw head and wall surface.
＊ Hang device securely to these twp screws, adjust screw
head to wall surface to achieve a good grip.
＊ Plug electric cord to AC receptacle. Red LED at panel center will be on
immediately indicating device is in standby mode.
＊ Use Infrared Remote Control to power on and off device.
＊ In case device is to be flush mounted directly on a power recess, original
AC cord needs to be removed first. This can be done by inserting and
press down a 2mm wide flat screw driver into the slot of the connector
next to the wire, while pulling out the wire.
＊ Gauge 16 to 18 wire can be easily inserted and clutched.
＊ If remote AC wall switch is used for power on-off control instead of
Infrared controller, first time after the installation, turn on AC switch
and use the infrared controller to power up the unit (red LED becomes
green). Then the power on/off is controlled by the remote AC switch.
＊ This device should be mounted at least 180 cm above the ground
and as close as possible to building's outer side walls and near
windows where the base station signal strength is the highest.
＊ Installer can use a smart phone to determine measure signal strength.
Signal strength usually can be read in the status page.
＊ Use a 4mm concrete drill bit to drill two holes 21.5 cm apart and
about 2.5 mm deep. Plug two plastic wall anchors. Drive screw into
the wall. Leave about 2 mm space between screw head and wall surface.
＊ Hang device securely to these twp screws, adjust screw
head to wall surface to achieve a good grip.
＊ Plug electric cord to AC receptacle. Red LED at panel center will be on
immediately indicating device is in standby mode.
＊ Use Infrared Remote Control to power on and off device.
＊ In case device is to be flush mounted directly on a power recess, original
AC cord needs to be removed first. This can be done by inserting and
press down a 2mm wide flat screw driver into the slot of the connector
next to the wire, while pulling out the wire.
＊ Gauge 16 to 18 wire can be easily inserted and clutched.
＊ If remote AC wall switch is used for power on-off control instead of
Infrared controller, first time after the installation, turn on AC switch
and use the infrared controller to power up the unit (red LED becomes
green). Then the power on/off is controlled by the remote AC switch.
A very High efficiency (Ultra low
power consumption) and audio noise
free device. Requires no AC adapter.
power consumption) and audio noise
free device. Requires no AC adapter.
Will not interfere with DECT phones.
This is our standard model. More
then 2000 units sold worldwide in
2015.
then 2000 units sold worldwide in
2015.
Specification:
Shielding frequency bands:
GSM (I & II)/CDMA 860 ~ 965 MHz
DCS/PCS/PHS/DECT 1800 ~ 2000 MHz
WCDMA/CDMA2000 2110 ~ 2170MHz
4G LTE 758 ~ 803 MHz
Wi-Fi 2400 ~ 2500 MHz
WiMax 2565 ~ 2690 MHz
Frequency bands can be customized for different countries.
Input Power: 100~240 VAC, 50-60 Hz (< 25 Watts)
Shielding range : >15 meters radius @ ＜-85 dBm basestation
signal
Antenna : Internal (semi-directional with gain >4dB)
Characteristics:
1. Remote Infrared controller
2. Does not interfere up-link signal (base station)
3. Instant blocking Audio reception and data downloading
(Drop out connection from base station within 20~30 seconds)
4. Switch for Wi-Fi band selection
5. Can be customized not to interfere with DECT phones
Shielding frequency bands:
GSM (I & II)/CDMA 860 ~ 965 MHz
DCS/PCS/PHS/DECT 1800 ~ 2000 MHz
WCDMA/CDMA2000 2110 ~ 2170MHz
4G LTE 758 ~ 803 MHz
Wi-Fi 2400 ~ 2500 MHz
WiMax 2565 ~ 2690 MHz
Frequency bands can be customized for different countries.
Input Power: 100~240 VAC, 50-60 Hz (< 25 Watts)
Shielding range : >15 meters radius @ ＜-85 dBm basestation
signal
Antenna : Internal (semi-directional with gain >4dB)
Characteristics:
1. Remote Infrared controller
2. Does not interfere up-link signal (base station)
3. Instant blocking Audio reception and data downloading
(Drop out connection from base station within 20~30 seconds)
4. Switch for Wi-Fi band selection
5. Can be customized not to interfere with DECT phones
6. No cooling fan (noise free)
7. 100 % domestic( Taiwan) designed and manufactured
Dimension : 270(W) x 240(H) x 60(T) mm
Weight : ＜1.4Kg
Operating Temperature : 0℃ ~ 50 ℃ (outdoor model optional)
7. 100 % domestic( Taiwan) designed and manufactured
Dimension : 270(W) x 240(H) x 60(T) mm
Weight : ＜1.4Kg
Operating Temperature : 0℃ ~ 50 ℃ (outdoor model optional)
Operation：
＊ It is a wall mount device for continuous operation
with AC input.
＊ This product required only 2 to 3 second to power-up
and can immediately blocking down link reception.
＊ Maximum power radiation plane is perpendicular to device housing.
The radiation power to the front direction is about 4dB
greater then to the back. This radiation plane should be positioned
properly to maximize the cell phone interception during installation.
＊ To avoid from spilling to unwanted area, the radiation power is optimized
for most practical applications.
It is not designed with intention to compete in range.
＊ For large space application, multiple units in cellular formation
should be used.
＊ This device depends on cooling fins to radiate heat. Proper ventilation
spacing should be provided during installation.
＊ It is a wall mount device for continuous operation
with AC input.
＊ This product required only 2 to 3 second to power-up
and can immediately blocking down link reception.
＊ Maximum power radiation plane is perpendicular to device housing.
The radiation power to the front direction is about 4dB
greater then to the back. This radiation plane should be positioned
properly to maximize the cell phone interception during installation.
＊ To avoid from spilling to unwanted area, the radiation power is optimized
for most practical applications.
It is not designed with intention to compete in range.
＊ For large space application, multiple units in cellular formation
should be used.
＊ This device depends on cooling fins to radiate heat. Proper ventilation
spacing should be provided during installation.
