- Capacity : 10KVA to 10,000KVA
- 1 Phase Voltage :
  100V, 120V, 200V, 220V, 230V, 240V, 3.3KV, 11KV, 22KV, other voltage are available on order.
- 3 Phase Voltage :
  220V, 380V, 400V, 440V, 460V, 575V, 3.3KV, 11KV, 22KV, other voltage are available on order.
- Based on CNS 598, CNS 599 or the National Standards of each country.
- Nippon Steel Standard 50H 400 (H14)
- Heat-resistant Enameled Cooper Wire
- Energy Saving
   . The iron core is made of high permeability original silicon steel sheets to greatly reduce
      iron loss (No-load loss). Copper loss (Load loss).
   . Improvements have been made on coil structure to reduce Copper loss (Load loss) sharply.
   . By reducing copper and iron losses, the purpose of "Energy Saving" can be realized.
- Space Saving
   . The losses incurred during operation have been lessened,  the size of radiator
     in the transformer can be relatively cut down. 
   . Consequently the space required for installation of this special transformer can be reduced.
- Electricity Cost Saving

    . Due to sharp decrease in full losses (by as much as 40% ~ 55%), a huge cut down effect on

      annual electricity cost can be observed.

    . Short investment return period can be expected (2 ~ 5 years approximately)

- Powder Coated Cubicle

- Connection Symbol : Dyn1 or Dyn11 (Other Connection are available to meet requirements)

- Insulation Resistance : 100 MΩ

- Layer Short Test : 400 Hz / 20 Seconds / 800V

- Withstand Voltage Insulation : AC 2000V

- Customization Welcome !